Neoware t5730 - Thin Client, User Manual

Page: 132 / 506

The Toolbar
110 Redefining the Toolbar
3
Click the down-arrow button again to display the
Command
options.
4
Select a button bitmap from the
Buttons
list.
You can add your own bitmaps to the standard bitmap list by
clicking the
Add Custom Bitmap
button and selecting the bitmap
files to load. Buttons will be automatically generated using the
bitmaps in these files.
5
Specify the command to be performed when this button is
clicked either by selecting from the
Commands
list or by typing
your own definition in the
Current Tool
text box.
6 Click the
Insert at Current
button.
7
Click
OK
when you have finished. The toolbar will immediately
be updated.
Assigning User-
Defined Functions
You can enter a definition of your own in the
Current Tool
text box.
The definition can contain key functions and control characters to be
actioned as well as normal text.
Specifying Key
Functions
You can cause a key function to be actioned by including the virtual
key name of the key enclosed by the
< and > characters. You may
omit the VK_ and VT_ parts (etc.) of the virtual key name. For
example, the Enter key would be specified as <ENTER> .
To send the function of a key combination, type the < character fol-
lowed by the virtual key names linked together with + characters and
ending with the
> character. For example, Alt F4 would be specified
as <ALT+F4> .
To send the function of a sequence of keys one after the other, enter
each virtual key name in the order required, enclosing each virtual
key name with the
< and > characters. Each enclosed virtual key
name must immediately follow the previous enclosed virtual key
name with no spaces. For example,
F2 then F3 then F4 would be
specified as <F2><F3><F4> .