Neoware t5730 - Thin Client, User Manual

Page: 250 / 506

Setup Menus
228 Block Transmission
Send Only Selected Areas
Factory default: Unchecked
The setting of this option determines whether all characters or only
those in selected areas on the current page are sent to the host when
the
Enter key is pressed.
When unchecked, all characters on the current page will be sent
when the
Enter key is pressed. When checked, this option will
enable only the characters in selected areas to be sent to the host
when the
Enter key is pressed. The setting of the
Send All Selected
Areas
option determines which selected areas are sent.
Send All Selected Areas
Factory default: Checked
When the
Send Only Selected Characters
option is checked, the set-
ting of this option determines whether all selected areas on a page
are sent to the host when the
Enter key is pressed, or only the area
containing the cursor.
When checked, this option will enable all selected areas to be sent to
the host. When unchecked, only the selected area containing the cur-
sor will be sent to the host.
Line Transmission On
Factory default: Unchecked
The setting of this option determines whether data is sent to the host
a single line at a time or a full or partial page at a time when the
Enter key is pressed.
When checked, a single line of valid characters will be sent to the
host. In this mode the
Return key has the same function as Enter .
When unchecked, a full or partial page will be sent to the host when
the
Enter key is pressed. The size of the page is determined by the
setting of the
Send Partial Page
and
Transmit Protocol
options.