Neoware t5730 - Thin Client, User Manual

Page: 149 / 506

Setup Menus
The File Menu 127
When a COM port is selected, clicking the
Configure
button will
display a
Printer Serial Settings
dialog in which you can specify the
baud rate, parity, flow control, data bits and stop bits settings.
Direct Print Data to a Network Printer
To direct print data to a printer on the network, select
Use Network
Printer (LPR)
and enter the
LPD Hostname
. Clicking the
Setup
but-
ton will display an
LPD Device Settings
dialog that enables you to
specify various print settings.
You must specify the
Printer Name
. The
Job Name
and
User Name
entries are optional (the
User Name
will default to root if none is
specified). You can specify how many times the LPR protocol will
attempt to execute the print job before cancelling by setting the
number of
Retries
and the number of seconds delay between each
attempt.
Clicking the
Advanced
button will display a dialog that enables you
to send printer-specific commands to specify (for example) font size,
colour, or page header and footer. Refer to the next section for
details.