Neoware t5730 - Thin Client, User Manual

Page: 326 / 506

IBM 3270 Emulation
304 The Status Line
Do Not Enter
A cross symbol will appear when input from the keyboard or mouse
will not be accepted by the host (except
Reset and SysReq ). Sym-
bols to the right of this will indicate the reason. Pressing the Reset
key will remove some of these symbols from the status line.
Note that the emulation includes typeahead capability so that in most
cases you can continue to enter data without waiting for the Do Not
Enter message to clear as the data will be stored until the host is
ready.
Indicates that a programming error in the
data from the host has been detected,
possibly due to incompatible application
software. Press the Reset or SysReq key to remove this indicator
and unlock the keyboard.
Indicates that you must wait while the requested
function is performed.
Indicates that you tried to enter an invalid
character into a numeric field when the
numeric-lock feature was active. The keyboard
numeric-lock feature can be overridden by using a Shift key. The
keyboard can be unlocked and the indicator removed by pressing the
Reset key.
Indicates that you tried to enter data in the wrong
location. This will occur when you attempt to do
any of the following:
1 Enter, insert, erase, or delete a character when the cursor is in a
protected field or at a field attribute location.
2
Perform a cursor-select operation when the cursor is not in a
valid cursor-select field.
The keyboard can be unlocked and the indicator removed by press-
ing the
Reset key.
Indicates that you cannot enter any data
because the application program has disabled
the keyboard following an entry.