Neoware t5730 - Thin Client, User Manual

Page: 176 / 506

Setup Menus
154 PT250 Settings
Block Mode
Factory default: Unchecked
The setting of this option determines how data is transmitted to the
host.
When unchecked, each character entered from the keyboard is
immediately sent to the host which processes it then echoes it back
to the display.
When Block mode is checked, characters are displayed but not sent
to the host until the
Enter key is pressed. The size of the block of
characters is determined by the
Line Block Mode
option.
Line Block Mode
Factory default: Unchecked
The setting of this option determines how much data is transmitted
when the emulation is in Block mode and the
Enter key is pressed.
When unchecked, the contents of the screen (page) will be sent to
the host. When checked, the contents of the current cursor line will
be sent.
Multinational Character Sets
Factory default: Checked
The setting of this option determines which characters may be gen-
erated from the keyboard.
When unchecked, the character set for the keyboard nationality
specified in the
Emulation Settings
dialog is mapped to G0 , the
default character set mode (as indicated on the status line). In effect,
national characters from the Additional character set are swapped
with Standard (ASCII) characters to form the National set mapped to
G0, so the Additional set contains the missing ASCII characters.
This means that you can still generate the full range of ASCII and
Additional characters by using the
Char Set
function (refer to the
section “Displaying Alternate Characters” on page 350 for details).