Neoware t5730 - Thin Client, User Manual

Page: 173 / 506

Setup Menus
HP 700-92/96 Settings 151
FldSeparator
Factory default: ^_ (i.e. US)
This text box is used to specify the ASCII character used to indicate
the end of each protected field (except the last) that is sent in Edit
mode.
To change the current definition, delete the definition displayed in
the text box and type in the new one, either as the control key char-
acter equivalent or the decimal value of the ASCII character. For
example, the default ASCII character
US can be entered by typing
the characters ^ and _ , representing the keys Ctrl + _ which, when
pressed together would generate the US code.
Decimal values are entered as three-digit numbers immediately pre-
ceded by an underscore character. Values with only two digits must
be preceded by a zero. For example, the decimal value of
US is 31,
so this would be entered as _031 .
BlkTerminator
Factory default: ^^ (i.e. RS)
This text box is used to specify the ASCII character sent to the host
to indicate the end of a data block transmission.
To change the current definition, delete the definition displayed in
the text box and type in the new one, either as the control key char-
acter equivalent or the decimal value of the ASCII character. For
example, the default ASCII character
RS can be entered by typing
the character ^ twice, representing the keys Ctrl + ^ which, when
pressed together would generate the RS code.
Decimal values are entered as three-digit numbers immediately pre-
ceded by an underscore character. Values with only two digits must
be preceded by a zero. For example, the decimal value of
RS is 30,
so this would be entered as _030 .