Neoware t5730 - Thin Client, User Manual

Page: 165 / 506

Setup Menus
Emulation Settings 143
Character Set Mode: National
Factory default: Unchecked
This will only be available if the system is configured for a language
that supports national replacement character sets.
The setting of this option determines the type of character set used to
generate characters. When checked, a character set specific to the
selected keyboard nationality is used. When unchecked (default)
TeemTalk is in
Multinational
mode, a character set consisting of two
tables of characters is used. This enables characters from any key-
board nationality to be generated.
Graphics
Factory default: ReGIS
This option is only available if your version of TeemTalk supports
graphics emulations and the
Alpha Emulation
option is set to one of
the DEC VT, Ansi BBS, AIXTerm, AT 386 or Sco Console emula-
tions. The setting determines the graphics mode that will be entered
when the host sends graphics commands.
ReGIS
This emulation enables you to run applications written
for the DEC VT340 terminal in ReGIS mode.
Tek4014
This emulation enables you to run applications written
for the Tektronix 4010 and 4014 terminals.
VT640
This emulation enables you to run applications written
for the Retrographics VT640 terminal.
W2119
This emulation enables you to run applications written
for the Westward 2119 terminal.
Tertiary Device Attribute
Factory default: Unspecified
When TeemTalk is in VT420 mode (
Alpha Emulation
set to
VT500
and
VT Terminal ID
set to
VT420
), this option enables you to specify
the tertiary device attribute report that is sent in response to a request
from the host.