Neoware t5730 - Thin Client, User Manual

Page: 171 / 506

Setup Menus
HP 700-92/96 Settings 149
CR = CR/NULL
Factory default: Unchecked
This option must only be checked if you are going to use the QEDIT
application. It overcomes a bug within QEDIT that ignores the LF
character if the terminal transmits CR/LF . Inserting a NULL after
the CR character cures the problem.
Display Form Feeds
Factory default: Checked
When checked, this will cause form feeds to be represented on the
display as
FF
characters.
Ignore Form Feeds
Factory default: Unchecked
When TeemTalk receives a form feed command from the host, it
normally results in a line feed on the display in HP 700/92 mode.
Selecting this option will cause TeemTalk to ignore all form feed
commands received from the host.
Terminal ID
Factory default: 70092
This specifies what is reported back to the host in response to a
terminal identification request. (Note that not all features of the
specified terminal may be supported.)
Clicking the arrow button will display a drop-down list box showing
the available settings,
70092
,
2392A
,
2622A
,
70094
or
70096
. If
you are using the keyboard, press the up or down arrow keys until
the setting required is displayed. You can either select from this list
or enter a different terminal identity in the text box.
Pages
Factory default: 4
In HP 700-92/96 mode the display area is 80 or 132 columns by 24
lines with 168 lines stored off-screen, giving a total display memory