Neoware t5730 - Thin Client, User Manual

Page: 133 / 506

The Toolbar
Redefining the Toolbar 111
Specifying
Characters
There are various ways in which you can specify a particular charac-
ter. For example, the
ESC character can be specified using any one
of the following five entries:
_027 Decimal value (underscore character followed by a 3-digit
number).
\033 Octal value (backslash character followed by a 3-digit
number).
\u001B Unicode value (backslash and u characters then unicode
value).
^[ Control key value ( ^ represents the control key on the key-
board).
\e Additional value for ESC .
The following 'backslash' values can be used:
\u Unicode introducer \r Carriage return
\n Line feed \e Escape
Note that as the \ and ^ characters are used as value introducers, to
enter these as character values you need to precede them with a
backslash character, i.e. enter
\ as \\ and ^ as \^ .
The Euro character can be specified by entering the unicode value
\u20ac .
Adding a Space
Between Buttons 1
Click the down-arrow button to the right of the
Current Tool
box
to display the buttons currently in the toolbar.
2 Click on the button which will be to the right of the space to be
added so that it is displayed in the
Current Tool
box.
3 Click the down-arrow button again to display the
Command
options.
4 Select the
[Space]
option at the top of the
Commands
list box.
5
Click the
Insert at Current
button.