Neoware t5730 - Thin Client, User Manual

Page: 281 / 506

DEC VT Emulations
The Status Bar 259
Item 8 : This will display the time in 24 hour format when in DEC
VT500 mode if the VT525 set time command has been
received from the host.
Item 9 : Indicates the status of the printer as follows:
None
indicates that the printer is not turned on or not con-
nected, or not installed in Microsoft Windows.
Not Ready
indicates that the printer is not ready to receive
data for printing.
Ready
indicates that the printer is ready to receive data for
printing.
Auto
indicates that the emulation is in Auto Print mode in
which the current cursor line is sent to the printer when a
command for the cursor to move to the next line is issued.
Controller
indicates that the emulation is in Printer Con-
troller mode in which the host has direct control over the
printer. Print screen commands issued from the keyboard
or mouse will be ignored.
Tty Print
indicates that the emulation is in TTY Print
mode. In this mode, incoming screen text (but not control
codes except
CR and LF ) are sent to the printer.
ErrGen
indicates that an error has occurred and a message
box will be displayed indicating the error.
Item 10 : This indicates the keyboard mode. It will be blank when
the keyboard is in normal mode and will display
DEC
when
in DEC mode. You can toggle between normal and DEC
mode by pressing the keys
Alt + Num Lock together.
Item 11 : Indicates the status of the aux port as follows:
Ready
indicates that the aux port is ready for bidirectional
output.
In Use
indicates that the aux port is currently busy.