Neoware t5730 - Thin Client, User Manual

Page: 231 / 506

Setup Menus
Serial Settings 209
Serial Settings
This dialog is displayed by selecting
Serial
in the
Settings
menu, or
by clicking the
Configure...
button in the
New Connection
dialog
when the connection type is set to
Serial
. Note that the port for serial
communications is specified in the
File
menu
New Connection
dialog.
Baud Rate
Factory default: 9600
This specifies the transmit and receive baud rates for the port
selected for host communications.
Parity
Factory default: None
This option specifies the parity mode for each transmitted character.
If the number of
Data Bits
is
8
, set this option to
None
.
Selecting
Odd
will cause an eighth bit to be added with a value of 1
if the previous 7 bits add up to an even number, and 0 if the previous
7 bits add up to an odd number. Selecting
Even
will cause an eighth
bit to be added with a value of 1 if the previous 7 bits add up to an
odd number, and 0 if the previous 7 bits add up to an even number.
Mark
parity will set every eighth bit to 1 and
Space
parity every bit
to 0.