Neoware t5730 - Thin Client, User Manual

Page: 84 / 506

Host Connection Settings
62 TCP/IP Connection Settings
bilities have been tried, at which point the emulation will report a
device name rejected error.
For example, TEST%d4% will give TEST1 on all connections
until the host rejects the name as in use, in which case TEST2 will
be used. If this is already in use then TEST3 is used, or if already in
use then TEST0 . These values are preserved over power off, so the
first connection of any given power on may not be TEST1 . Assume
that the start point is random.
Note: There are separate counters for the IBM 3270 and IBM 5250
emulations.
When you achieve a TN3270E connection, the LU device name that
you are connected as will be displayed on the status line. If the spec-
ified device is rejected by the server or host, then an error message
box will be displayed indicating the reason.
Associate
This is available when the
IBM 3270 Model
option is set to
3287-1
(a printer). It is used to request that the device name of the printer
associated with a particular terminal is assigned to this Telnet ses-
sion. The name of the terminal is specified here. (This is imple-
mented as described in RFC 1647.)
TN3270E Options
TN3270E in implemented as described in RFC 1647. These options
should not be changed unless required by your System Administra-
tor.
The
Bind
setting determines whether or not the server is allowed to
send the SNA Bind image and Unbind notification to the emulator.
When
Responses
is selected, positive and negative response
handling is supported. It allows the server to reflect to the emulator
any and all definite, exception, and no response requests sent by the
host application.