Neoware t5730 - Thin Client, User Manual

Page: 163 / 506

Setup Menus
Emulation Settings 141
TVI 910
,
TVI 920
and
TVI 925
Provide compatibility with software designed to
drive the TeleVideo 910+, 920 and 925 terminals,
respectively, as emulated by the Wyse WY-50/50+/
60 terminals. Refer to the chapter “Wyse Emula-
tions” on page 375 for details.
TVI 950
and
TVI 955
Provide compatibility with software designed to
drive the TeleVideo 950 and 955 terminals, respec-
tively.
Unisys T27
Provides compatibility with software designed to
drive the Unisys T27 terminal. Refer to the chapter
“Unisys T27 Emulation” on page 365 for details.
Viewdata 40
,
Viewdata 80
and
Viewdata Split
These enable access to a viewdata service using one
of three display formats as described in the chapter
“Viewdata Emulation” on page 371.
VT PCTerm
Provides compatibility with software designed for
the PC Term mode supported by DEC.
VT52
and
VT100
These emulations enable you to run applications
written for the DEC VT52 and VT100 terminals,
respectively. Refer to the chapter “DEC VT Emula-
tions” on page 253 for details.
VT500 7-Bit
and
VT500 8-Bit
These emulations enable you to run applications
written for the DEC VT320 terminal, the difference
is in their treatment of 8-bit control codes. When
VT500 7-Bit
is selected, all 8-bit codes are con-
verted to their 7-bit equivalents, whereas
VT500 8-
Bit
leaves 8-bit codes unchanged. If you are using
VT200 applications, select
VT500 7-Bit
. Refer to
the chapter “DEC VT Emulations” on page 253 for
details.