Neoware t5730 - Thin Client, User Manual

Page: 180 / 506

Setup Menus
158 IBM 3151 Settings
lowing lines will move down the number of lines inserted, causing
the lines originally at the bottom of the display to be discarded.
When set to
Character
, you will be able to insert one or more
characters in the current line. Characters to the right of the cursor
position will move along. If the
Auto Wrap
option is set to
No
, then
characters originally at the end of the current line will be discarded.
If set to
Yes
, characters on all following lines will move along,
forcing characters at the end of the last line to be discarded.
When set to
Both
, the function of the
Line
and
Character
settings
will be enabled.
Insert Character
Factory default: Space
The setting of this option determines the effect of pressing the
Insert
key.
When set to
Space
, a space character will be inserted after the
current cursor position.
When set to
Mode
, the emulation will enter Insert mode when the
Insert
key is pressed.
Auto Wrap
Factory default: Checked
The setting of this option determines what happens to the cursor and
data sent to the display when the end of the current line is reached.
When checked, the cursor will automatically move to the beginning
of the next line. Note that this will always be the case in block mode
or in a formatted page regardless of the setting of this option.
When unchecked, the cursor will remain at the end of the current
line and each new character sent to the display will overwrite the
character already occupying the cursor position.