Neoware t5730 - Thin Client, User Manual

Page: 232 / 506

Setup Menus
210 Serial Settings
Flow Control
Factory default: Input
This option specifies the type of flow control used by the line port to
communicate readiness to transmit or receive data from the host.
None
No flow control.
Input
XON/XOFF on received data.
Output
XON/XOFF on transmitted data.
In/Out
XON/XOFF on transmitted & received data.
Hardware
DTR/CTS hardware flow control.
Data Bits
Factory default: 8
This option specifies the number of data bits sent for each transmit-
ted character.
Stop Bits
Factory default: 1
This specifies the number of stop bits sent for each transmitted
character.
Transmit Rate
Factory default: 28800
The setting of this option determines the maximum effective baud
rate that TeemTalk transmits terminal reports and data sent as a
result of pasting data to the host.
On Line
Factory default: Checked
When this option is checked, normal two-way communication
between TeemTalk and the host is enabled. When unchecked,
TeemTalk is in Local mode and data will not be sent to, or received
from the host. Data typed on the keyboard will be displayed on the
screen or actioned if a control command is typed.