Neoware t5730 - Thin Client, User Manual

Page: 139 / 506

Setup Menus
Opening a Session 117
configuration for TeemTalk to load. This is displayed by selecting
Open Session...
in the
File
menu.
The
Defined Sessions
list box displays one-line descriptions of ses-
sion configurations that were created using the TeemTalk
Connec-
tion Wizard
, or the
Save Session As
dialog when running TeemTalk.
The session configuration currently loaded is highlighted. Clicking
on a defined session then the
OK
button will cause TeemTalk to load
that session configuration.
The session configuration that TeemTalk will load by default on
startup is indicated by a letter
D
next to its name. You can change the
default selection by selecting the required session description then
clicking the
Save As Default
button.
Session templates created by the system administrator are indicated
by the letter
T
after the session name. Refer to the section “Session
Management” on page 17 for details.
You can delete any session configurations except templates by
selecting the description then clicking the
Delete
button. Note that if
the session deleted was a copy of a template (which will have the
same name), the template version will reappear in the
Defined
Sessions
list, as indicated by the letter
T
.