Neoware t5730 - Thin Client User Manual Download

Page: 397 / 506

375

TeemTalk 6.0 for Windows User Manual

CHAPTER 24

Wyse Emulations

This chapter describes features of the Wyse WY-50, WY-50+ and
WY-60 terminal emulations.

Creating a Wyse Emulation Session

Using the TeemTalk
Connection Wizard

This section describes the basic procedure for creating a Wyse
emulation session using the TeemTalk Connection Wizard.

Run the TeemTalk Connection Wizard from the

Start

menu by

selecting

Programs

Neoware TeemTalk

Configure Ses-

sion

. The

Connection Information

dialog will be displayed.

In the

Connection Name

box, enter a name that will identify

this session configuration for future selection.

Select the Wyse terminal emulation required in the

Emulation

list box:

WY50

WY50+

and

WY60

Provide compatibility with software designed to drive the
Wyse WY-50, WY-50+ and WY-60 terminals, respectively.

WYSE PCTerm

Provides compatibility with software designed for the PC Term
personality supported by Wyse.

ADDS A2

Provides compatibility with software designed to drive the
ADDS Viewpoint A2 terminal, as emulated by the Wyse WY-
50/50+/60 terminals.

Summary of Contents for t5730 - Thin Client



























































































































































































































































































































































































































































































































Search results

Summary of Contents for t5730 - Thin Client

Reviews:

Related manuals for t5730 - Thin Client

Brands by name

Popular brands

Neoware t5730 - Thin Client, User Manual

Search results

Summary of Contents for t5730 - Thin Client

Reviews:

Related manuals for t5730 - Thin Client

Brands by name

Popular brands