Neoware t5730 - Thin Client, User Manual

Page: 48 / 506

TeemTalk Connection Wizard Settings
26 Connection Information
respectively. Refer to the chapter “DEC VT Emula-
tions” on page 253 for details.
VT500 7-Bit
and
VT500 8-Bit
These emulations enable you to run applications
written for the DEC VT320 terminal, the difference
is in their treatment of 8-bit control codes. When
VT500 7-Bit
is selected, all 8-bit codes are con-
verted to their 7-bit equivalents, whereas
VT500 8-
Bit
leaves 8-bit codes unchanged. If you are using
VT200 applications, select
VT500 7-Bit
. Refer to
the chapter “DEC VT Emulations” on page 253 for
details.
VT+HP220
This emulation is based on the VT500 terminal
series and includes the HP function keys F1 - F8
(not user programmable). The terminal ID is set to
VT220.
VT100+
This emulation is an enhanced version of the VT100
emulation that provides additional functionality
such as colours. It is the same as the VT-UTF8 emu-
lation except that it only supports ASCII characters
0-127 (decimal).
VT-UTF8
This emulation is an enhanced version of the VT100
emulation that supports non-English and drawing
characters. It supports localization of the single-byte
and double-byte character sets and all other lan-
guages supported by Windows. Additional func-
tionality, such as colours, is also provided.
WY370
Provides compatibility with software designed to
drive the Wyse WY-370 terminal.
WY50
,
WY50+
and
WY60
Provide compatibility with software designed to
drive the Wyse WY-50, WY-50+ and WY-60
terminals, respectively. Refer to the chapter “Wyse
Emulations” on page 375 for details.