manualshive.com logo in svg

Monroe Electronics DASDEC-II, User Manual

Share
Download
Monroe Electronics DASDEC-II User Manual Download Page 96

One-Net/DASDEC User Manual

5-67

v3.0 | r1016

Alert Policies Screen

Decoder Alert Languages

This setting enables users to select the languages used within the EAS device. The de

-

fault is English. Multiple languages may be selected using the SHIFT or CTRL keys.

Configure Duplicate EAS Alert Handling for Decoder Auto-Forwarding 

An incoming EAS alert that is an exact duplicate of a previously decoded alert, is 

completely discarded and a message is logged in the operation log. EAS alerts that are 

duplicates except for Station ID or ORG code are stored as a decoded alert and can be 

optionally auto-forwarded or held. Use the selector to choose the setting to control 

manual or auto-forwarding for these alerts.

Configure Update Policy for Active EAS Alerts

This option allows you to expire an active alert when a new alert is decoded and up

-

dates the previous alert.  When enabled, you can choose what requirements the new 

alert must have to expire the previous active alert.
The following is an example of this situation: Two local radio stations are being moni

-

tored. Both send out a monthly test for the same FIPS codes, with the same start time 

and duration, but the stations have changed the station ID. The alerts arrive several 

minutes apart. The EAS device has been set to auto-forward monthly tests to the given 

FIPS codes. The first decoded monthly test is forwarded automatically. The user has 

configured the duplicate alert handling to NOT auto-forward duplicate alerts that differ 

in Station ID or ORG code. The second alert is decoded, but is held for manual forward.

Summary of Contents for DASDEC-II





























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands