manualshive.com logo in svg

Monroe Electronics DASDEC-II, User Manual

Share
Download
Monroe Electronics DASDEC-II User Manual Download Page 86

One-Net/DASDEC User Manual

5-57

v3.0 | r1016

Video/CG Configuration Screen (Broadcast Mode)

In Broadcast mode (with a valid Plus Package License Key), there are six sub-tabs within 

the Video/CG Setup: 

•  Video Out

•  Main Serial

•  USB Serial 1 through 4 for up to four expansion USB serial ports

Broadcast mode EAS devices support up to five (5) simultaneous serial ports (one main 

RS232 port on the back panel (COM1), and 1 to 4 expansion RS232 ports provided via a 

USB port expander), each running a different character generator protocol.

Main Serial  

The 

Main Serial 

sub-tab screen has three sections: 

• 

Serial Port Character Generator Configuration

• 

Character Generator Attribute Settings

• 

FIPS Group and EAS Codes Group filter configuration

 

Serial Port Character Generator Configuration

The radio selection buttons show the Character Generator (CG) used when a 

decoded alert is forwarded or encoded (or no CG). There are eight supported 

character generator protocols:

•  Monroe R194 CG

•  Monroe CEMS-0500/1000

•  Standard TFT

•  VDS

•  Sage Generic CG

•  Sage News Room

•  Chyron CODI 

•  Decade Engineering XBOB

•  Decade Engineering XBOB-4

•  BetaBrite LED sign

•  Monroe Envoy

•  BDI GPM-300 Matrix Switcher

•  BTI MSRP Audio Switcher

•  DM Engineering MSRA/MSRE Audio Switcher

Note

Many EAS device 

models can also 

optionally provide 

native analog NTSC 

composite video 

output. Video/CG 

behavior is configured 

only on this page and 

applies to both Decoder 

Alert Forwarding 

and Encoder Alert 

Origination.

Note

The 

Accept Changes 

button at the bottom 

of each screen is 

required to submit any 

modifications.

Summary of Contents for DASDEC-II





























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands