One-Net/DASDEC User Manual
5-129
v3.0 | r1016
GPIO Setup Screen
Server GPIO Table
The top section of this page displays the current status of the built-in GPIO hardware.
The top row displays the status of the inputs. The first input is the state of the Front
Panel button. This is not available as a GPIO input but uses the internal GPIO circuitry.
The next two columns show the programmed actions and current closure state for
GPIO inputs 1 and 2. The second row displays the status of the relay outputs and of the
internal audio/pass-through relay. The first two columns show the programmed trig
-
gers and current closure state for GPIO outputs 1 and 2.
Two buttons are placed under the table for testing GPIO output relays. The first button,
Close EAS Audio Relay
sends out a command to close all relays programmed to EAS
audio. The companion button,
Open EAS Audio Relay
, sends the command to open all
relays programmed to EAS audio playout.
Programmable GPIO Input / Output Actions
Programmable options are GPIO Input 1, GPIO Input 2, GPIO Output 1 Relay, and GPIO
Output 2 Relay. The available pull-down menu selections will vary depending on the
enabled license keys. Pay close attention to the following descriptions to view the ap
-
propriate pull-down menu options.
Caution
The
Close/Open EAS
Audio Relay
buttons apply
to ALL relays assigned to
EAS audio playout – both
internal and external (Net
Controller / Net GPIO)
relays. Make sure the use
of these buttons does not
negatively impact regular
EAS operations.
