One-Net/DASDEC User Manual
5-90
v3.0 | r1016
Other Options
Use EAS NET originating unit station ID when forwarding an EAS NET received alert
Check to enable.
Front Panel Button press will release Held alert
Allows front panel button to release an alert held pending GPI closure.
Forward audio message in decoded Weekly Tests
If a decoded Required Weekly Test (RWT) has audio, it will be forwarded. This is
uncommon, but can occur. When disabled, decoded RWT alerts with audio will discard
the audio portion of the RWT during forwarding.
Segmented Manual Alert Forwarding
If enabled, manual forwarding will provide buttons to send the alert header and
attention signal separately from audio and EOM. This provides an opportunity to dub in
live audio. Uncheck to disable.
Main
The screen provides controls to set the basic values to construct an EAS alert and
contains three sections; general station settings, Origination Settings, and Forwarding
Settings.
EAS Station ID
Type up to 8 characters in this text field to identify the Station ID. This code is included
in all originated alerts, both manually forwarded and automatically forwarded alerts.
Uses Server Timezone:
Displays the configured time zone. To change this setting, go to
Setup > Time
.
Primary Alert Language
This pull-down menu is used to select the primary alert language. A list of available
languages is displayed.
Extended Alert Language
A list of available languages is displayed within this box. Select one language by clicking
it. Multiple languages may be selected by using the CTRL key when making additional
selections.
Omit serial/audio/video/stream play out for non-national alerts
Check to NOT play alert through serial/audio/video/stream outputs. Useful for only
sending alert through non-streaming Net Alert interfaces. Applies to both Origination &
Forwarding.
GPI Alert Hold
Optionally designate GPI inputs to hold alerts (until closure or during closure). When
using the last two options, a list of GPI’s is available for selection.
•
Do not use GPI Alert Hold
•
Designated GPIs Hold alert while Closed
•
Designated GPIs Hold alert while Open
