One-Net/DASDEC User Manual
8-4
v3.0 | r1016
be refreshed by a button at the bottom of the page to show new information.
Web Session Log Screen
View a text version of a log page by clicking on the provided link
Click for Text Version
of log file
hyperlink.
Operation Log
Presents time stamped information about the EAS devices’ operation. This interface
works the same as the one for the Web Session Log. Important EAS events will be
shown here. At the top of every page is a
OpLog
button that navigates to this page.
View a text version of a log page by clicking on the provided link
“Click for Text Version
of log file”
.
Operating System Log
Presents the last 500 lines of the current and previous backup of the Linux System Log.
Security Log
Presents the last 500 lines of the Linux System Security Log.
Boot Log
Presents the last 500 lines of the Linux System Boot Log.
EMail Log
Presents the last 500 lines of the Linux System Email Log. Also, has list of the Email
Submission Queue and the Email Send Queue.
DEBUG LOGS
The Server Debuglogs screen is only available when the
Server Debug Log Interface
check box is enabled within the
Setup > Server > Options
screen. These logs provide
customer service engineers a better view of what is happening within the EAS device.
For each of these sub-tabs categories, a pull-down menu enables users to set Basic,
Extra Debug Log Detail Level or None at all. These pull-down menus allow users to turn
on specific debug logs for any of the above sub-tab categories. When debugging is no
longer needed, make sure to uncheck the
Server Debug Log Interface
check box.
Note
The Server Debug Log
Interface feature is
typically used by and
under the direction of a
qualified customer service
engineer. Do not turn
this feature on unless
directed by a Monroe
Electronics / Digital Alert
Systems customer service
engineer.
