One-Net/DASDEC User Manual
5-123
v3.0 | r1016
All FIPS codes trigger
Check to enable all alerts, regardless of FIPS codes, to trigger a crawl on the target
Net CG clients. Uncheck to only allow alerts for specific FIPS areas to trigger the crawl.
When unchecked, you can select from the FIPS Group pull-down menu. Alerts to any
FIPS code within the group will be sent to the remote Net CG clients.
All EAS codes trigger
If enabled, all EAS codes will trigger the Net CG client interface. Set the check box
to enable/disable EAS code filtered trigger control. If disabled, the alert EAS code is
filtered for a specific match as a way to control whether or not the target Net CG client
is triggered. If All EAS is disabled, select an EAS Group from the pull-down menu. If
the EAS code of an active forwarded/originated alert matches any of the EAS codes
within that group, the alert will be sent using the Net CG client. With careful use of this
feature, and with multiple clients, one EAS device can serve many different regions at
the same time.
All incoming alert Station IDs trigger
This is additional filter criteria for activation of this Net CG client. Enter the desired
Station ID or Station ID’s (separated by a ‘|’) into this text field – up to 8 characters for
each ID. This Net CG client will not activate without matching this station ID(s). The
default value is the wildcard character (*). All station ID’s will activate this Net CG client
when using that character.
When you finish making changes, click the
Accept Changes
button to save the
configuration.
Net Switch
The
Net Switch
sub-tab enables control of an Ensemble Designs Avenue™ 7600 HD/
SD Embedder/Disembedder for EAS alert audio switching. Utilizing the onboard audio
channel swap and shuffle capabilities of the Avenue 7600 module, users can switch
between EAS alert audio (assigned to AES 7/8) and 5.1 program audio (AES 1/2, 3/4,
5/6). The Net Switch sub-tab is displayed with a valid Plus Package license key.
