manualshive.com logo in svg

Monroe Electronics DASDEC-II, User Manual

Share
Download
Monroe Electronics DASDEC-II User Manual Download Page 203

One-Net/DASDEC User Manual

A-2

v3.0 | r1016

 

Web interface supports 128-bit encrypted Secure Socket Layer (SSL).

 

KDE desktop available via directly connected keyboard/mouse/VGA monitor

 

Email for decoded/forwarded/originated/error alerts & system status

 

Supports 2

nd

 network interface via USB

 

Supports a variety of printers via USB/Parallel

 

Operational status indication via LED and LCD

 

Web interface for easy software update

 

Programmable GPI input to trigger actions and GPI output relays during alerts.

 

English and English/Spanish EAS text translations. Editable EAS translations.

 

Configurable audio output port selection for alert origination and forwarding.

 

Audio level input/output controls via Web Interface.

 

Audio file upload.

 

Configurations file download/upload.

Decoder/Forwarding Features

 

Decodes FCC EAS codes and NOAA SAME codes from radio transmissions or 

other analog audio input.

 

Automatic audio level correction for reliable operation. Advanced er

-

ror detection, correction, and logging for noisy EAS transmissions and 

troubleshooting quality of service problems.

 

Supports fully unattended operation.

 

Supports manual and user configurable filtered automatic alert auto-

forwarding. Easy to use web interface for configuration of auto-forwarding 

locations and codes.

 

Web interface makes it easy to review and print logs of active and expired 

decoded/forwarded alerts.

 

Automatic alert storage management.

 

Manages and displays multiple unique simultaneous active decoded alerts.

 

Decoding status displayed on unit LCD and LED & Web interface.

 

Stores each audio section of EAS alerts into digital files.

 

Supports TFT-911 serial protocol for alert audio playback and alert transla

-

tion data transfer from devices requiring TFT. Supports a variety of other serial 

protocols for operating CGs.

 

Will support scanning up to six decoder input channels (depends on hardware 

expansion)

 

Optional support for a variety of network forwarding protocols: EAS NET (with 

DVS-168), DVS-644(SCTE-18), and streaming MPEG2 and MPEG4 output digital 

interfaces.

Encoder/Origination Features

 

Easy to use Web interface for creating and sending FCC EAS alerts.

 

Web interface makes it easy to configure commonly used locations and alert 

types.

 

Web interface makes it easy to review and print logs of active and expired 

originated alerts.

 

All audio sections of encoded alerts are stored into separate digital audio files.

 

Automatic originated alert storage management.

 

Supports multiple unique simultaneous active originated alerts.

 

Automatic randomized Weekly test generation within user configurable 

calendar time spans. 

 

Web interface upload feature for digital audio files makes it easy to encode the 

audio portion of EAS alerts.

Summary of Contents for DASDEC-II





























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands