One-Net/DASDEC User Manual
7-9
v3.0 | r1016
Reset
The entire alert setup process can be restarted by clicking the
Reset
button – to the
right of the red
Send Alert
button.
Send Alert and View Alert Action Table Sections
View Alert Action Table
When the alert action table check box is checked, you can see the Alert Origination Ac
-
tion Table. It contains active hyperlinks displaying the current status of the various pe
-
ripheral interfaces that can be activated by an alert. The table displays which peripheral
interfaces are available and which are enabled. The active links point to the associated
page under
Setup
. Click the interface name to follow the hyperlink and change any
specific peripheral used during alert origination.
Serial Interface Bypass
If a serial protocol has been selected, a Serial Interface Bypass check box is displayed.
When the Serial Interface Bypass check box is checked, the currently selected serial
protocol will not be used during the alert origination. A message in the Origination
Table above changes to say the Serial Protocol is bypassed.
General EAS: Multistation mode
When in MultiStation mode and at least one station is enabled, the
General Alerts
page displays added options to support alert origination to individual stations.
