One-Net/DASDEC User Manual
6-6
v3.0 | r0616
canceled by another event of the same type and for the same area, which redefines the
event times. Decoded alerts appear in the Currently Active Decoded Alerts list as long
as they are current. Active events move to the expired alert list as each one reaches its
end time.
Forwarded active events display the forwarding time as an active link label on the
Alert
Events > Forwarded Alerts
status page.
Active events that are not automatically forwarded present buttons to allow
review and editing, acknowledgment, and manual forwarding / re-enable manual
forwarding.
These buttons are described below.
Acknowledge Pending Alert
The screen shot above shows an active, unacknowledged, unforwarded alert for the
active Demo alert. Decoded alerts that have not been forwarded or acknowledged will
be in an
unacknowledged
state. This state is indicated on the EAS device’s front panel
status LED with a blinking slowly/regularly red light and within the web interface active
alert status display by a flashing button labeled
Acknowledge Pending Alert
. To end
the unacknowledged state and stop the front panel red status LED from flashing, click
the flashing
Acknowledge Pending Alert
button. You can also acknowledge an alert
by pressing the front panel button once or a by a programmed GPIO closure. Any alert
that remains unacknowledged or unforwarded will remain in this state until it expires.
Edit/Review Decoded Alert for Forwarding Screen
