One-Net/DASDEC User Manual
5-116
v3.0 | r1016
DVS-644/SCTE18 Client Configuration Interface Section
Various information fields must be configured to identify and correctly communicate to
the DVS-644/SCTE18 client. The basic fields are the
Remote Host Unicast or Multicast
and
Remote Host Port.
Enter these addresses according to the specific DVS-644/
SCTE-18 target server. Often this is an MPEG-2 multiplexor, such as a Stream Encryptor
Modulator, serving a defined set of digital cable channels.
Multicast TTL
- This value determines the number of router hops that are allowed
during multicast of the DVS644/SCTE18 Cable Alert Message before the UDP message
is blocked. Enter a sufficiently large value (from 0 to 200) if you are multicasting.
Multicasting requires the proper configuration of a network outside the EAS device.
Advanced DSG Delivery
- Defaults to Disabled. The default method for delivering the
DVS644/SCTE18 Cable Alert Message MPEG2 system table uses a standard MPEG2
Transport Stream. Check to switch to Advanced DSG delivery. Use DSG delivery for
communicating with DOCSIS Standard Gateway equipment.
If
Advanced DSG delivery
is used then the text field option for setting the
Network
MTU
(Max transmission unit) is available. The default is 1500 but can be set lower if
