One-Net/DASDEC User Manual
5-115
v3.0 | r1016
may also be enabled and disabled. Every enabled client configuration is triggered for
whichever action of alert forwarding and alert origination is currently enabled.
Select DVS644 client
This pull-down menu contains a lists the names of the existing client interfaces. It also
prints the current number of defined client interfaces. The maximum number of client
interfaces is 64. Choose the named existing client interface to edit.
Add / Duplicate / Delete DVS644 (SCTE18) Client Interface Buttons
Users can create configurations for up to 64 DVS644 (SCTE-18) CEAM (Cable Emergency
Alert Message) clients.
If no client configurations exist or a new configuration is needed, click the
Add
DVS644(SCTE18) Client Interface
button to create a new interface configuration.
To delete a client configuration, select the desired client from the Select DVS644 client
pull-down menu and click
Delete this DVS644(SCTE18) interface button
.
To duplicate an existing client interface, select the
Duplicate DVS644(SCTE18 Client In-
terface
button. A different name will be automatically generated. This is the ideal way
to create many client interfaces that are mostly the same except for the IP address.
Client Interface Configuration Table
Client Interface Name
Use the
Client Interface Name
text entry field to name each client.
ENABLE Client Interface
Use this check box to enable/disable a client interface at any time. Each client can be
independently enabled and disabled allowing an easy way to stop/ restart using a client
for a specific region.
Caution
DVS644/SCTE18 client
configuration addition,
duplication, and deletion
are immediate and cannot
be canceled.
