One-Net/DASDEC User Manual
5-26
v3.0 | r1016
Server Network Configuration Screen (Network Status Information)
Static Route Configuration
This simple interface allows statically defined network routes to be configured, en
-
abled/disabled and added/deleted at network startup.
To configure a static route:
1. Click the
Add Static Route
button within the Static Route Configuration section of
the screen. A series of static route configuration settings will appear.
2. Enter the
IP Address
,
Netmask
(or subnet mask), and
Gateway
settings into their
respective text fields.
3. Select the desired network interface. These settings should be applied from the
pull-down menu.
4. Enable the static route by checking the
Enable
check box.
5. Click the
Accept Static Route Changes/Restart
button to apply these settings.
To disable a static route:
1. Uncheck the
Enable
check box.
2. Click the
Accept Static Route Changes/Restart
button.
3. The other static route configuration settings will remain, and the route will remain
inactive until enabled again.
Note
A conflicting route
can block network
connectivity.
