One-Net/DASDEC User Manual
5-126
v3.0 | r1016
Net GPIO units supports inputs. As of EAS device version 8.0, only the Web Relay Dual
unit supports inputs.
Only enable this option when an input from a Net GPIO unit is
required.
Add / Duplicate / Delete NetGPIO Client Interface
You can create configurations for up to 8 Net GPIO clients.
•
If no client configurations exist, or if you want a new one, click the
Add NETGPIO
Interface
button to create a new interface configuration.
•
To delete a client configuration, select the client and click on
Delete this GPIO
interface
.
•
To duplicate an existing client interface (a different name will be automatically gen
-
erated), select the
Duplicate NETGPIO Client Interface
button. This is the best way
to create many client interfaces that are mostly the same except for the IP address.
Close EAS Audio Relay, Open EAS Audio Relay
Manual overrides intended for test purposes. Pressing either button will either close or
open any audio relays programmed for audio playout. This will control both the internal
relays and the Net Controller / Net GPIO relays programmed for audio playout.
Hub Controller / Net GPIO Sub-Tab
ENABLE Client Interface
Enables/disables the use of the Net GPIO client interface.
IP Address
Enter the IP address of a remote NET GPIO target unit. No port number is needed,
Caution
Net GPIO client
configuration addition,
duplication, and deletion
is immediate and cannot
be canceled.
