Monroe Electronics DASDEC-II User Manual Download Page 181

Page: 181 / 220

One-Net/DASDEC User Manual

6-14

v3.0 | r0616

ORIGINATED/FORWARDED ALERTS

The

Originated/Forwarded Alerts

screen displays the status of all alerts “sent” from

the EAS device. Three sections display the following:

•

Scheduled Originated Alerts

•

Currently Active Originated/Forwarded Alerts

•

Expired Originated/Forwarded Alerts.

Users may perform the following actions from this screen:

•

Review expired Originated and Forwarded EAS alerts

•

Display, save, and print EAS message logs

Scheduled Originated Alerts

This section lists scheduled alerts. Typically, it is populated with the next Required

Weekly Test when Automatic Random Required Weekly Test Generation is turned on

(see Chapter 5 - Station > Main).

Currently Active Originated/Forwarded Alerts

This section lists originated and forwarded currently active alerts.

Expired Alert View

As with the other event status views, you may choose View Expired Alerts, View

Expired Alerts Pending Deletion, or View Deleted Expired Alerts. (See the Incoming/

Decoded Alerts section for more information about the options in this section.)

Expired Originated/Forwarded Alerts

This section displays the total number of expired and currently active originated and

forwarded alerts, and offers the same expired alert event viewer as the other event

viewers.

The

Date Range

field sets a date range to display alerts.

ORIGINATED ALERTS

The

Originated Alerts

screen displays the status of all originated alerts “sent” from the

EAS device. Three sections display the following:

•

Scheduled Originated Alerts

•

Currently Active Originated Alerts

•

Expired Originated Alerts.

Users may perform the following actions from this screen:
• Review expired Originated EAS alerts

•

Display, save, and print EAS message logs

This screen operates in the same way as other

Alert Events

screens but only displays

Originated Alerts.

Summary of Contents for DASDEC-II





























































































































































































































Search results

Summary of Contents for DASDEC-II

Reviews:

Brands by name

Popular brands

Monroe Electronics DASDEC-II, User Manual

Search results

Summary of Contents for DASDEC-II

Reviews:

Brands by name

Popular brands