One-Net/DASDEC User Manual
5-96
v3.0 | r1016
was configured in the
Setup > Time
screen. To change to a different time zone, click the
pull-down menu and click the desired selection.
Primary Station Language
This pull-down menu is to select the primary alert language for this sub-tab. Select
from the list of available languages.
Extended Alert Languages
A list of available extended alert languages is displayed within this box. Select one
language by clicking it. Multiple languages may be selected by using the CTRL key when
making additional selections.
Omit serial/audio/video/stream play out for non-national alerts
Check to NOT play alert through serial/audio/video/stream outputs. Useful for only
sending alert through non-streaming Net Alert interfaces. Applies to both Origination
and Forwarding.
Run alert audio on Multiplayer
Due to the limited number of audio outputs in relation to the number of stations
controlled by the EAS device in MultiStation mode, Monroe Electronics / Digital Alert
Systems provides an optional MultiPlayer. The MultiPlayer is a separate 1RU chassis
that provides up to 5 completely independent EAS audio channels playable at any time.
To enable the play out of EAS audio from a MultiPlayer, check this box.
Video Output upon alert Orig/Fwrd playout
For EAS units with internal Video Out; when checked, this setting will utilize the internal
video output to generate a full screen alert page for this station.
Station Actions
This section represents a series of serial, GPIO, EAS Net, NET CG’s, and SCTE-18 client
configuration settings for this station. Select the appropriate settings and click the
Submit Selection Setting
button. Multiple selections can be made by using the CTRL
key when making selections.
Station Sub-Tab Origination Settings Section
Note
A MultiPlayer will
require proper
setup prior to being
configured in this
screen. Follow the
Quick Start Guide
included with the
MultiPlayer before
checking this box.
