One-Net/DASDEC User Manual
6-11
v3.0 | r0616
Active Decoded Alerts – MultiStation Mode
A severe EAS alert may need to be forwarded faster than to each enabled station in
sequence. In that case, a separate button, labeled
Forward Alert Once for All Stations
,
is available and can be pressed to forward the alert to the Main station configuration. If
this button is used, all stations will forward immediately.
Alert Forwarding Action Table
Below the active alerts, the Alert Forwarding Action Table supports multiple station
status by displaying the enabled and disabled actions per station. They may be changed
at any time prior to forwarding in order to affect the outcome of actions when an alert
is forwarded to a specific station. Follow the station name links to the
Setup > Station
(and appropriate station sub-tab) to change the desired settings for station alert
forwarding.
After an alert is forwarded to a station, the
Forward Alert
button is replaced by the
Enable Reforward
button with a message showing the time of forwarding to the station
name. This message is an active link to the
Alert Events > Forwarded Alerts
screen.
Follow that link to view the status of the forwarded alert. The image below shows the
display for an active decoded alert after forwarding to the second station.
