Mitsubishi Electric FR-F800, Instruction Manual

Page: 277 / 834

Parameters (D) Operation command and frequency command
FR-F800 5 - 115
5.6 (D) Operation command and frequency command
Purpose Parameter to set
Refer to
page
To select the operation mode Operation mode selection P.D000 Pr. 79 5-116
To start up in Network operation
mode at power-ON Communication startup
mode selection
P.D000, P.D001 Pr. 79, Pr. 340 5-125
To select the command source
during communication operation
Operation and speed
command sources during
communication operation,
command source selection
P.D010 to P.D013
Pr. 338, Pr. 339,
Pr. 550, Pr. 551
5-127
To prevent motor from rotating
reversely Reverse rotation prevention
selection
P.D020 Pr. 78 5-134
To set the frequency by pulse train
input
Pulse train input
P.D100, P.D101,
P.D110, P.D111 Pr. 291,
Pr. 384 to Pr. 386
5-135
To perform JOG operation JOG operation P.D200, P.F002 Pr. 15, Pr. 16 5-139
To control frequency with
combinations of terminals
Multi-speed operation P.D300 to P.D315
Pr. 28,
Pr. 4 to Pr. 6,
Pr. 24 to Pr. 27,
Pr. 232 to Pr. 239
5-141