Mitsubishi Electric FR-F800, Instruction Manual

Page: 662 / 834

(N) Operation via communication and its settings Parameters
5 - 500
Supported BACnet object
●
Analog input
R: Read only,
W: Read/Write (Commandable values not supported),
C: Read/Write (Commandable values supported)
●
Analog output
R: Read only,
W: Read/Write (Commandable values not supported),
C: Read/Write (Commandable values supported)
Values written to the objects that support the commandable values are stored in the Priority Array,
even when "Write Access Denied" is returned due to inconsistency of the writing requirements
such as the operating mode, on condition that the values are written within the setting range.
Available regardless of the operation mode, operation command source, and speed command
source.
Object
identifier
Object name
Present value
access type
Description Unit
0 Terminal 1 R
Represents actual input voltage of terminal 1.
(The range varies depending on the Pr. 73 and
Pr. 267 settings.
–10 to +10 V (–100% to +100%),
–5 to +5 V (–100% to +100%) )
percent (98)
1 Terminal 2 R
Represents actual input voltage (or input
current) of terminal 2.
(The range varies depending on the Pr. 73 and
Pr. 267 settings.
0 to 10 V (0% to 100%),
0 to 5 V (0% to 100%),
0 to 20 mA (0% to 100%) )
percent (98)
2 Terminal 4 R
Represents actual input voltage (or input
current) of terminal 4.
(The range varies depending on the Pr. 73 and
Pr. 267 settings.
2 to 10 V (0% to 100%),
1 to 5 V (0% to 10 0%),
4 to 20 mA (0% to 100%) )
percent (98)
Tab. 5-264: Object assignment for analog inputs
Object
identifier
Object name
Present value
access type
Description Unit
0 Terminal FM (CA) C
Controls actual output current level of terminal
FM/CA.
Control is available when Pr. 54 "FM/CA
terminal function selection" = "85"
.
(Setting range: 0 to 200%)
percent (98)
1 Terminal AM C
Controls actual output voltage level of
terminal AM.
Control is available when Pr. 158 "AM terminal
function selection" = "86"
.
(Setting range: -200 to 200%)
percent (98)
Tab. 5-265: Object assignment for analog outputs