Mitsubishi Electric FR-F800, Instruction Manual

Page: 31 / 834

Installation and wiring Peripheral devices
FR-F800 2 - 3
Compatible with the FR-F820-02330(55K) or lower and FR-F840-01160(55K) or lower.
Compatible with the FR-F820-03160(75K) or higher and FR-F840-01800(75K) or higher.
Power regeneration
common converter
(FR-CV
)
Provides a large braking capability. Install this as required.
2-73
Power regeneration
converter
(MT-RC
)
2-74
Brake unit
(FR-BU2, FR-BU
)
Allows the inverter to provide the optimal regenerative braking
capability. Install this as required.
2-66
Resistor unit
(FR-BR
, MT-BR5 )
USB connection
A USB (Ver. 1.1) cable connects the inverter with a personal
computer.
A USB memory device enables parameter copies and the trace
function.
2-63
Noise filter
(ferrite core)
(FR-BSF01, FR-BLF)
Install this to reduce the electromagnetic noise generated from the
inverter. The noise filter is effective in the range from about
0.5 MHz to 5 MHz.
A wire should be wound four turns at maximum.
3-6
Induction motor Connect a squirrel-cage induction motor.
⎯
Contactor
Example:
No-fuse switch (DSN type) Connect this for an application where a PM motor is driven by the
load even while the inverter power is OFF. Do not open or close the
contactor while the inverter is running (outputting).
⎯
IPM motor
(MM-EFS, MM-THE4) Use the specified motor. An IPM motor cannot be driven by the
commercial power supply.
8-4
Symbol Name Overview
Refer to
page
Tab. 2-1: Inverter and peripheral devices (2)