manualshive.com logo in svg

Mitsubishi Electric FR-F800, Instruction Manual

Share
Download
Mitsubishi Electric FR-F800 Instruction Manual Download Page 137

Basic operation

Monitoring the inverter status

FR-F800

 4 - 7

4.2 

Monitoring the inverter status

4.2.1 

Monitoring of output current and output voltage

4.2.2 First 

monitored 

item

The first monitored item to be displayed in the monitor mode is selectable. To set a monitored item
as the first monitored item, display a monitored item, and press the SET key for a while.

쑶

NOTE

Pressing the SET key in the monitor mode switches the monitored item to output frequency, out-
put current, and then to output voltage.

Operation

Press 

 during operation to monitor the output frequency. 

[Hz] indicator turns ON.

Press 

 to monitor the output current. 

This operation is valid during running or stopping under any operation mode. 
[A] indicator turns ON.

Press 

 to monitor the output voltage. 

[V] indicator turns ON.

Tab. 4-4:

Monitoring of output current and output voltage

NOTE

Other monitored items, such as output voltage and set frequency, are also available. Use Pr. 52
"Operation panel main monitor selection", or Pr. 774 "Operation panel monitor selection 1" to Pr.
776 "Operation panel monitor selection 3" to change the setting. (Refer to page 5-193.)

Example 

쑴

Changing example: 
Set the output current as the first monitored item.

Operation

Select the monitor mode, and select the output current.

Press 

 for a while (1 s). 

The output current is set as the first monitored item.

When the monitor mode is selected next time, the output current is monitored first.

Tab. 4-5:

Setting the output current as the first monitored item

NOTE

Use Pr. 52 "Operation panel main monitor selection", or Pr. 774 "Operation panel monitor selection
1" to Pr. 776 "Operation panel monitor selection 3" to change the monitored item. 
(Refer to page 5-193.)

Summary of Contents for FR-F800



































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands