Mindray Anesus ME7T, Operator'S Manual

Page: 83 / 312

4 Setup
Operator’s Manual 4 - 25
• Click [Delete] to delete a user-defined protocol.
• Click [Up] or [Down] to move the selected protocol.
• Click [Move to Top]/[Move to Bottom] to move the selected protocol to the top or bottom of
the list.
4.5.2 View Management
• Click to select the views in the list. The image, annotation, body mark and measurement
settings can be checked on the right.
• Click to select a user-defined protocol in the list. Click [Add View] to add a view template to
the protocol.
4.5.3 Create a New Protocol
You can create user-defined protocols and customize the automated procedure.
Perform the following procedure:
1.
In the iWorks preset screen, click [Add Protocol] to create a new protocol.
Or, select an existing protocol and click [Copy] to customize the protocol based on the
previous template.
2. Enter the protocol name, type and select the application region.
3. Click [Add View] to enter the view name and perform image settings.
– In the measurement setting, if “Measurement on next section” is selected, the system will
save two section images after finishing the section operation. One of the two sections will
include the measurement result.
– Select the checkbox of “Disable Protocol Body Marks” for body mark display settings.
4.6 Stress Echo Preset
4.6.1 Protocol Edit
You can create, edit, delete, copy, export and load the Stress Echo protocols using the Protocol
Editor dialog box.
Item Description
Protocol Name Enter the protocol name.
Trigger Set the trigger type.
WMS model Set the chamber segment division method.
Loop usage Displays the acquired loop number as well as the total usable loop number.
View Set the views for each stage.
Standard Views Set the standard view.
Load Import a protocol.
Export Export a protocol.
New Protocol Create a new protocol.
Copy Protocol Create a new protocol with an existing one.