Mindray Anesus ME7T, Operator'S Manual

Page: 207 / 312

15 DICOM/HL7
Operator’s Manual 15 - 7
15.8 Structured Report
The Structured Report (SR) can be sent with meeting the following procedures:
•
DICOM structured report installed with the corresponding exam mode;
• The state of the SR should be “Cancel” or “Stop”.
• Set the storage option to “Attach SR When Store Images” or “Only Store SR”, see
“4.7.2 DICOM Service Preset”.
Perform the following procedure:
1.
Click to select a patient or an exam record in the list on iStation page, and click [Send Exam] in
the iStation page.
2. Select DICOM in the storage server list, select a server in the “Storage Server” list.
3. Click [OK], the status of sending task can be viewed in task management.
After successful storage of both image and structured report; you can see the storage
commitment mark “
√ ” in the list below on the iStation screen.
NOTE:
Only the PACS system from the Medstreaming company (http://www.medstreaming.com/
default.aspx) supports sending self-defined measurements by DICOM SR.