Mindray Anesus ME7T, Operator'S Manual

Page: 262 / 312

18 - 6 Operator’s Manual
18 System Maintenance
3. Remove any residue with a water-moistened soft cloth on the main unit.
4. Wipe off water on the main unit using sterile cloth or gauze. Do not dry the main unit by
heating.
18.1.3 Cleaning the peripherals
Do the cleaning maintenance according to your actual peripheral configuration; items which are not
configured can be skipped.
18.1.4 Checking the Probe
• Visually check to confirm that there are no cracks or expansion of the probe head.
• Visually check to confirm that there is no deterioration or erosion of the probe cable.
• Visually check to confirm that none of the connector pins are bent, destroyed or falling off.
Content Description
Color and B/W video
printer First wipe off dust or stain attached to the cover of printer with soft dry
cloth, then clean the inside of printer. Be sure to do the cleaning
maintenance according to the operation manual if necessary.
Graph / text printer First wipe off dust or stain attached to the cover of printer with soft dry
cloth, then clean the inside of printer. Be sure to do the cleaning
maintenance according to the operation manual if necessary.
Footswitch Use soft dry cloth with a little mild soap water to wipe off the dust or
stain attached to the pedals or cable of foot switch.
Barcode reader First use soft dry cloth to wipe off dust attached to glass panel of the
reader, then the dust or strain attached to cable and bracket.