Mindray Anesus ME7T, Operator'S Manual

Page: 79 / 312

4 Setup
Operator’s Manual 4 - 21
3. Enter the Name in the “Measurement Custom Wizard” dialog box, then click [Next].
4. Set the user-defined attributes in the dialog box.
5. Click [Complete] to finish setting. The user-defined item is listed in the “Selected Items” menu
and in the “User-defined” category of “Available Items.” An asterisk appears after the user-
defined item for identification.
In the meantime, the user-defined item will be added automatically to the “Selected Items” in
the Report template. If the item is completed in an exam, the results will be displayed in the
report.
Add a Study
You can add or remove user-defined study items in the [Selected Items] column.
Perform the following procedure:
1.
Select the [Measure] tab page.
2. Click [Add Study] on the right.
3. Enter the study name in the dialog box that appears.
4. Click [OK] and the item will be added to the “Selected Items.”
5. Select a measurement/calculation item from the “Available Items” and click [>] to add the item
to the user-defined study.
6. Repeat the step 5 to add more items if necessary.
7. Move the cursor to click on the study and click [Property] on the right to edit the measure
sequence.
Edit User-defined Items
Select the target defined item in the “Available Items”, and click [Edit].
Remove User-defined Items
• Remove Measurement/Calculation
a.
Select “User Defined” in the “Available Items”, and select the desired item.
b. Click [Delete].
• Remove Study
Select a user-defined study, click [<].