Mindray Anesus ME7T Operator'S Manual Download Page 256

Page: 256 / 312

17 - 2

Operator’s Manual

17 DVR Recording

Perform the following procedure:
1.

Click

to open the dialog box, and click [Local Video Management] to enter the managing

dialog box.

Click [Rename] to rename the video file.

Select the destination and the target file, click [Send] to send the file to the selected path.
During sending progress, the icon displays as

17.3 DVR Video Replay

You can replay the video and audio record.

17.3.1 Replay on PC

Connect the USB disk or optical disk with the file to the PC, open the file directly.

17.3.2 Replay on the ultrasound system

Perform the following procedure:
1.

Click

to open the dialog box and select desired playing type: Hard disk/USB/CDROM.

Click [Play] to open the dialog box.

Select the path and name for the file and then click [OK] to replay the file, or double-click the
file name directly.

Summary of Contents for Anesus ME7T

























































































































































































































































































































Search results

Summary of Contents for Anesus ME7T

Reviews:

Related manuals for Anesus ME7T

Brands by name

Popular brands

Mindray Anesus ME7T, Operator'S Manual

Search results

Summary of Contents for Anesus ME7T

Reviews:

Related manuals for Anesus ME7T

Brands by name

Popular brands