manualshive.com logo in svg

Mindray Anesus ME7T, Operator'S Manual

The Mindray Anesus ME7T Operator's Manual is a comprehensive and user-friendly guide for maximizing the potential of your medical device. Download the manual for free from our website and unleash the full capabilities of the ME7T, providing vital information and instructions to optimize its usage in a healthcare environment.

Share
Download
background image

  6  Image Acquisition

Operator’s Manual

6 - 9

6.6

Anatomical M Mode

For an image in the traditional M mode, the M-mark line goes along the beams transmitted from the 
probe. Thus it is difficult to obtain a good plane for difficult-to-image patients who cannot be 
moved easily. However, in the Anatomical M mode, you can manipulate the M-mark line and move 
it to any position at desired angles. The system supports anatomical M scanning (including Free 
Xros M mode and Free Xros CM mode) in 2D imaging modes (B, Color, Power and TVI mode).

 

CAUTION

Anatomical M Mode and Color Anatomical M mode images are provided for 
reference only, not for confirming diagnoses. Compare the image with those of 
other machines, or make diagnoses using non-ultrasound methods.

TIP:

Free Xros M imaging and Free Xros CM imaging are options.

6.6.1 Linear Anatomical M (Free Xros M)

Free Xros M imaging is supported on frozen B image, B+M image and B+Power/Color/TVI image.
Perform the following procedure:
1.

Adjust the probe and image to obtain the desired plane in real-time B mode or M mode.

Or select the B mode cine file to be observed.

2.

Tap [Free Xros M] on the touch screen to enter Free Xros M mode or press the user-defined 
key to enter Free Xros M mode.

There are 3 M-mark lines available, each with a symbol of “A”, “B” or “C” at one end as 
identification.

3.

Adjust the sampling line (single line or couple of lines) to obtain optimized images and 
necessary information.

–

Tap [Show A], [Show B] or [Show C] on the touch screen to adjust the sampling line. The 
corresponding sampling line and the Free Xros M image appear on the screen. Then, 
activate the sampling line.

–

Tap [Display Cur.] or [Display All] on the touch screen to select whether to display the 
image of the current M-mark line or all. 
You can choose to display the sampling line on the current image or all.

–

Press <Set> to switch among the sampling lines and press <Cursor> to show the cursor.

4.

Adjust the image parameters to obtain optimized images.

5.

Press <B> to return to real-time B mode.

6.6.2 Free Xros CM (Curved Anatomical M-Mode)

In Free Xros CM mode, the distance/time curve is generated from the sample line manually 
depicted anywhere on the image. Free Xros CM is used for TVI and TEI modes.

Summary of Contents for Anesus ME7T

























































































































































































































































































































Reviews:

No comments

Related manuals for Anesus ME7T

Landoll 2130 Operator'S Manual preview
2130
Brand: Landoll Pages: 83
Garmin GSD20 Sounder Installation Manual preview
GSD20 Sounder
Brand: Garmin Pages: 12
Garmin GC 12 Installation Instructions Manual preview
GC 12
Brand: Garmin Pages: 13
Nel-Tech Labs messager usb Installation And User Manual preview
messager usb
Brand: Nel-Tech Labs Pages: 8
TDR Eco Pro User Manual preview
Eco Pro
Brand: TDR Pages: 8
Waterpik WP-800 Series Quick Start Manual preview
WP-800 Series
Brand: Waterpik Pages: 2
Eaton AtLite Sure-Lites SELDWA29SD Installation Instructions preview
AtLite Sure-Lites SELDWA29SD
Brand: Eaton Pages: 4
Xils lab miniSyn'X User Manual preview
miniSyn'X
Brand: Xils lab Pages: 31
Car Solutions IW03C-SB Instruction Manual preview
IW03C-SB
Brand: Car Solutions Pages: 24
Dangerous power FUSION FX Owner'S Manual preview
FUSION FX
Brand: Dangerous power Pages: 38
Kramer VM-12HDCP User Manual preview
VM-12HDCP
Brand: Kramer Pages: 16
Life 39.LED0613 Quick Start Manual preview
39.LED0613
Brand: Life Pages: 2
OttLite B2190Z Quick Start Manual preview
B2190Z
Brand: OttLite Pages: 2
Polygroup ILLUMINATIONS COLOR BLAST C35 Owner'S Manual preview
ILLUMINATIONS COLOR BLAST C35
Brand: Polygroup Pages: 4
Raymarine ST5000 Plus Owner'S Handbook Manual preview
ST5000 Plus
Brand: Raymarine Pages: 99
Vascular architect Instructions For Use Manual preview
architect
Brand: Vascular Pages: 64
Hakko Electronics FG101B-03 Instruction Manual preview
FG101B-03
Brand: Hakko Electronics Pages: 12
R.V.R. Electronica SDC200/RDS User Manual preview
SDC200/RDS
Brand: R.V.R. Electronica Pages: 60

Brands by name

Popular brands

Load more brands