Mindray Anesus ME7T, Operator'S Manual

Page: 307 / 312

I EMC Guidance and Manufacturer’s Declaration
Operator’s Manual I - 3
RF emissions
CISPR 11 Class B The system is suitable for use in all establishments
including domestic establishments and those directly
connected to the public low-voltage power supply network
that supplies buildings used for domestic purposes
Harmonic Emissions
IEC 61000-3-2 Class A
Voltage Fluctuations/
Flicker Emissions
IEC 61000-3-3 Compliance
Table I-1
GUIDANCE AND MINDRAY DECLARATION-ELECTROMAGNETIC EMISSIONS
The system is intended for use in the electromagnetic environment specified below. The
customer or the user of system should assure that it is used in such an environment.
EMISSIONS TEST COMPLIANCE ELECTROMAGNETIC ENVIROMENT - GUIDANCE
Table I-2
GUIDANCE AND MINDRAY DECLARATION-ELECTROMAGNETIC IMMUNITY
The system is intended for use in the electromagnetic environment specified below. The
customer or the user of system should assure that it is used in such an environment.
IMMUNITY TEST IEC 60601
TEST LEVEL
COMPLIANCE LEVEL ELECTROMAGNETIC
ENVIRONMENT-
GUIDANCE
Electrostatic
Discharge(ESD)
IEC 61000-4-2 ±8 kV contact;
±15 kV air ±8 kV contact;
±15 kV air Floors should be wood,
concrete or ceramic tile. If
floors are covered with
synthetic material, the
relative humidity should
be at least 30%.
Electrical fast Transient /
burst
IEC 61000-4-4 ±2 kV for power supply
lines;
±1 kV for input/output
lines ±2 kV for power supply
lines;
±1 kV for input/output
lines Mains power quality
should be that of a typical
commercial or hospital
environment.
Surge
IEC 61000-4-5 ±1 kV line(s) to line(s);
±2 kV line(s) to earth ±1 kV line(s) to line(s);
±2 kV line(s) to earth Mains power quality
should be that of a typical
commercial or hospital
environment.
Voltage dips, Short
interruptions and voltage
variation on power supply
input voltage
IEC 61000-4-11 0 % U
T
; 0,5 cycle
At 0°, 45°, 90°, 135°,
180°, 225°, 270° and 315°
0 % U
T
; 1 cycle
70% U
T
for 25/30 cycle
at 0°
0 % U
T
; 250/300 cycle
0 % U
T
; 0,5 cycle
At 0°, 45°, 90°, 135°,
180°, 225°, 270° and 315°
0 % U
T
; 1 cycle
70% U
T
for 25/30 cycle
at 0°
0 % U
T
; 250/300 cycle
Mains power quality
should be that of a typical
commercial or hospital
environment. If you
require continued
operation during power
mains interruptions, it is
recommended that our
product be powered from
an uninterruptible power
supply or a battery.