manualshive.com logo in svg

Manitowoc 140.5.204, Operation Manual

Share
Download
Manitowoc 140.5.204 Operation Manual Download Page 253

Danger of severe structural damage on the boom if the limit

values of the permissible wind speeds are exceeded.
–

Do not exceed the specified limit values of the permissible

wind speeds.

–

When operating the crane, the displayed wind speed must

always be compared with the permissible wind speed.

–

Operate the crate safely within the limit values specified

below.

If the limit values of the permissible winds speeds are

exceeded, severe structural damage to the boom can occur.

The wind speed is measured at the highest position of the machine

using the anemometer (option).

Read off the wind speed in the 

“main menu”

 of the

SENCON.

 Gusts of wind must be taken into account when deter-

mining wind speeds.

Ä

 Chapter 2.6.6.3 “Permissible maximum wind speeds”

on page 58

6.4.1  Procedure when the maximum permissible wind speed has been reached out

of operation

Carry out the necessary safety measures before the preset limit

values are reached.

The machine has not picked up any load.

1.

Retract the boom fully.

2.

Lower the boom completely.

3.

Turn off the machine.

Ä

 Chapter 2.6.6.3 “Permissible maximum wind speeds”

on page 58

Ä

 Chapter 7.17.1 “Parking the machine” on page 512

6.4.2  Procedure when the maximum permissible wind speed has been reached in

operation

Carry out the necessary safety measures before the preset limit

values are reached.

NOTICE

Measure wind speed

Further notes

Further notes

Start-up and setup

27.04.2020

140.5.204 Telescopic crane

253

Fo

r

 

Reference

 

Only

Summary of Contents for 140.5.204






























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands