manualshive.com logo in svg

Manitowoc 140.5.204, Operation Manual

Share
Download
Manitowoc 140.5.204 Operation Manual Download Page 64

3.3.2  Safety and monitoring equipment

The safety devices of the machine protect the machine operator

and the surroundings while the machine is in operating mode.

Safety devices must not be dismantled or modified.

Safety feature

Description

Illustration

Load moment limitation

When the crane nears the load-

bearing capacity limit, a warning

signal rings in the cab and simul-

taneously the light for the load

moment limitation gives out an

optical warning signal.

If the permitted load moment is

exceeded, the load moment limita-

tion switches off all load moment

increasing machine movements

and the light for the load moment

limitation give out an optical and

acoustic signal.

Protective grating and protective

covering

Protective gratings and protective

coverings should prevent contact

with dangerous machine compo-

nents.

 

Safety lever

With the safety lever, the operator

can lock all of the work and travel

operations during work breaks

and before leaving the cab.

Emergency hammer and emer-

gency exit

If, in an emergency, the exit via

the cab door is locked, the oper-

ator can exit the cab through the

right-hand cab window. The emer-

gency hammer is for breaking the

window.

Protective roof (FOPS) (option)

The protective roof protects the

operator from falling objects.

 

Safety instructions

27.04.2020

140.5.204 Telescopic crane

64

Fo

r

 

Reference

 

Only

Summary of Contents for 140.5.204






























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands