Manitowoc 140.5.204 Operation Manual Download Page 325

Page: 325 / 669

The boom is fully retracted.

The secure locking unit is fully retracted.
The telescopic thruster T1 has a gray background in the fol-

lowing displays on the SENCON:
–

[Secure locking unit position indicator]

on the

“Pin boom”

menu page

–

[Pin boom display]

in the

“main menu”

Keeping the joystick lever tilted in direction

[Retract telescope]

, press button

[Fold fly boom/heavy-duty jib in/out]

on the joystick.

The holding function is enabled.

Re-adjust the height of the boom if necessary.

two functions are assigned

on the joystick, the rele-

vant switch must be in the correct position in order to carry

out the respective function.

Tilt the joystick in the

[Lift boom]

[Lower boom]

direction.

The holding function remains enabled.

6.7.3.2

Disabling the holding function

Requirement:

The holding function is enabled.

Press button

[Fold fly boom/heavy-duty jib in/out]

on the joy-

stick.

The holding function is disabled.

Other options for disabling the holding function:

extending the boom

pulling the safety lever

6.7.3.3

Overview of the most important operating and display elements

Display

The current position of each of the telescopic thrusters is displayed in (%).

The currently set extension mode is displayed.

white

Grey

Black

The telescopic thruster is

locked.

The secure locking unit is

near a securing position in

the lower boom section.

The secure locking unit is

secured in the relevant

telescopic thruster.

Pin boom display

Start-up and setup

27.04.2020

140.5.204 Telescopic crane

325

Reference

Only

Summary of Contents for 140.5.204






























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 140.5.204

Reviews:

Brands by name

Popular brands

Manitowoc 140.5.204, Operation Manual

Search results

Summary of Contents for 140.5.204

Reviews:

Brands by name

Popular brands