manualshive.com logo in svg

Manitowoc 140.5.204, Operation Manual

Share
Download
Manitowoc 140.5.204 Operation Manual Download Page 489

 

Switch position left

Switch position right

The telescopic cylinder is not activated.

The telescopic cylinder cannot be moved.

Retracting and extending the telescopic

thrusters/secure locking unit is not pos-

sible.

The telescopic cylinder is activated.

The telescopic cylinder can be moved.

Retracting and extending the telescopic

thrusters/secure locking unit is possible.

 

Switch position left

Switch position right

The 

[Luffing down - up]

 function is acti-

vated.

Lifting and lowering of the boom is pos-

sible.

The 

[Telescope in-out]

 function is acti-

vated.

Retracting and extending of the boom is

possible.

 

Display

Indicates the current stroke of the secure locking unit.

 

The secure locking

unit is positioned

far from the

securing position.

The secure locking

unit is positioned

too deep to be

secured.

The secure locking

unit needs to be

extended further in

order to be

secured.

The secure locking

unit is positioned

too high to be

secured.

The secure locking

unit needs to be

retracted further in

order to be

secured.

The securing posi-

tion is reached.

Telescopic cylinder activation

Switching Luffing down-up/Tele-

scope in-out

Secure locking unit position indi-

cator

Operation

27.04.2020

140.5.204 Telescopic crane

489

Fo

r

 

Reference

 

Only

Summary of Contents for 140.5.204






























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands