Manitowoc 140.5.204 Operation Manual Download Page 609

Page: 609 / 669

Move the transport vehicle alongside the side of the machine

where the second track wheel carrier is located.

It must be possible to place the second track wheel carrier

directly onto the transport vehicle, or to remove it from the

transport vehicle, without being lifted over the second track

wheel carrier.

Park the transport vehicle for the track wheel carrier at the

specified distance next to the machine.

Park the transport vehicle parallel to the track wheel carrier.

Data

Value Unit

5000 mm

196.9 in

Preparing the transport vehicle for

the second track wheel carrier

Transport

27.04.2020

140.5.204 Telescopic crane

609

Reference

Only

Summary of Contents for 140.5.204






























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 140.5.204

Reviews:

Brands by name

Popular brands

Manitowoc 140.5.204, Operation Manual

Search results

Summary of Contents for 140.5.204

Reviews:

Brands by name

Popular brands